Lopco Contracting

Cranston Overhaul

This presentation will run automatically.

This is a home located in the Western section of Cranston and needed quite a bit of surface preparation in order to allow us to provide the homeowner with a sound paint job and a completely updated appearance.

All of the rotted/damaged beyond repair miscellaneous woodwork was removed and replaced.

The existing downspout and gutter system was taken down completely and a new seamless, white, aluminum downspout and gutter system was installed.

The house was pressure washed using a chemical rinse down process.

All peeling areas were scraped and sanded as appropriate. One full coat of Sherwin Williams, A-100 oil-based exterior primer, tinted to match the finish coat color was applied to all included siding surfaces and one full coat of Sherwin Williams, A-100 oil-based exterior white primer was applied to all included trim surfaces. In both cases this was done in order to seal all bare wood and provide a sound surface over which to apply a corrective exterior spackle or the finish coat. All imperfections on the home were then treated with an exterior spackling compound. After the spackling compound was dried it was sanded to a smooth finish. All spackled areas were treated with another coat of whatever primer was used on the surface beneath the spackle before the spackle was applied. The finish coat was then applied to all exposed siding surfaces using the number of coats needed to ensure an even and consistent finish coat of Sherwin Williams Woodscapes, acrylic solid stain. The finish coat was applied to all included trim surfaces using the number of coats needed to ensure an even and consistent finish coat of Sherwin Williams, latex, Exterior SuperPaint, satin.

LOPCO Contracting is proud to be associated with the following companies: Better Business Bureau/Greater Providence Chamber of Commerce

Registration #s:
RI 21331 • MA 145887 • CT 610184


	JOB SPECS Remove/replace all miscellaneous rotted/damaged beyond repair woodwork Remove existing gutter system and install new gutter system Pressure wash - chemical rinse down Scrape thoroughly and sand as appropriate One complete coat of Sherwin Williams, A-100, oil primer tinted to match the finish coat color to all siding areas One complete coat of Sherwin Williams, A-100, oil primer, white to all trim areas Exterior spackle applied to all imperfection areas Dried exterior spackle sanded smooth Applied exterior spackle appropriately spot-primed Application of enough finish product to ensure an even and consistent finish of Sherwin Williams Woodscapes, acrylic solid stain to all siding Application of enough finish product to ensure an even and consistent coat of Sherwin Williams, latex, Exterior SuperPaint, satin to all trim Click on the link below for a FREE estimate or call 866.86.LOPCO.