Lopco Contracting

Victorian Revival

This is a home located in Providence, RI on the Washington Park section of Providence, RI/Edgewood section Of Cranston, RI border - an area whose architecture is probably one of the more under-appreciated areas of architecture in the state of RI.

This was an extensive project on an aging Victorian that was in obvious need of some serious attention.

The house was pressure washed using a chemical rinse down process. Any rotted wood that was found was replaced.

All the foundation windows in the home were replaced, the garage doors on the garage were replaced, the 2nd floor, front porch storm door was replaced, and prior to painting the entire front porch setup was completely re-constructed.

The two 1st floor, front porch doors were completely stripped to bare wood and had 1 coat of Minwax, oil stain applied to them and two coats of Minwax, Helmsman, oil, satin, clear polyurethane applied after the oil stain.

All peeling areas were scraped. One full coat of C2 oil-based exterior primer, tinted to match the finish coat color was applied to all included siding surfaces. One full coat of Sherwin Williams, A-100 oil-based exterior white primer was applied to all included trim surfaces in order to seal all bare wood and provide a sound surface over which to apply the finish coat. The finish coat was applied to all included siding surfaces and previously painted doors using one coat of Sherwin Williams, latex, Exterior SuperPaint, flat. The finish coat was applied to all included trim surfaces using one coat of Sherwin Williams, latex, Exterior SuperPaint, gloss. Finally, two coats of Sikkens, Rubol DEK solid oil stain was applied to all porch floor surfaces.

LOPCO Contracting is proud to be associated with the following companies: Better Business Bureau/Greater Providence Chamber of Commerce

Registration #s:
RI 21331 • MA 145887 • CT 610184
SEPA - Lead Safe Certified Firm

Lopco is RRP certified by the State of Rhode Island.


	JOB SPECS Pressure wash - chemical rinse down Carpentry work where needed Remove and replace with new all foundation windows, the garage doors, and the 2nd floor, front porch storm door Re-construct the entire front porch setup Completely strip the two 1st floor, front porch doors Scrape thoroughly as appropriate One complete coat of C2, primer tinted to match the finish coat color, exterior oil primer to all siding areas One complete coat of Sherwin Williams, A-100, white, exterior oil primer to all trim areas One complete coat of Sherwin Williams, latex, Exterior SuperPaint, flat to all siding and previously painted door areas One complete coat of Sherwin Williams, latex, Exterior SuperPaint, gloss to all trim One complete coat of Minwax oil stain and two complete coats of Minwax, Helmsman, oil, satin, clear polyurethane to the two 1st floor, front porch doors Two complete coats of Sikkens, Rubol DEK, solid oil stain, to all porch floor areas Click on the link below for a FREE estimate or call 866.86.LOPCO.