Lopco Contracting Lopco Contracting
1View Our Work2View Our Work3View Our Work4View Our Work5View Our Work6View Our Work7View Our Work8View Our Work9View Our Work10View Our Work
ContactLopco ContractingHomeLopco Contracting
Lopco Contracting
Lopco Contracting
Lopco ContractingLopco Contracting
Lopco Contracting
Lopco ContractingAbout UsLopco ContractingFAQLopco ContractingGREEN PRODUCTSLopco ContractingReferencesLopco ContractingLinks
Lopco Contracting Lopco Contracting

A New Look for an Old Home

This is a home located in the Fox Point section of Providence. The main portion of the home is well over one hundred years old and had definitely needed a facelift when we commenced work.

The house was pressure washed using a chemical rinse down process. Any rotted wood that was found was replaced. Wedge venting was done to certain areas of the home in order to allow the house to breath and pass moisture more easily. All peeling areas were thoroughly scraped. Any areas needing to be caulked/filled were done so as appropriate. The storm windows were taken down, the windows behind them were prepped as appropriate (including re-glazing where needed), finish coated, and the storm windows re-hung upon completion of the painting. One coat of Rustoleum, oil-based, rust oxide primer was applied to all rusted nail head areas. One complete coat of C2 oil primer tinted to match the finish coat colors was applied to all included areas. The finish coat was applied to all included siding surfaces using one coat of Sherwin Williams, latex, Exterior Duration, satin. The finish coat was applied to all included trim surfaces using one coat of Sherwin Williams, latex, Exterior Duration, gloss. The finish coat was applied to all included doors and shutters using two coats of Sherwin Williams, latex, Exterior Duration, gloss. Finally, two coats of Sikkens Rubol DEK, solid oil stain was applied to all porch floor areas.

Lopco Contracting
Lopco Contracting
Lopco Contracting
JOB SPECS
Pressure wash - chemical rinse down
Carpentry work where needed
Wedge venting done to certain areas of the home
Scrape thoroughly as appropriate
Caulk/fill areas where needed
The storm windows were taken down
The windows behind the storm windows were prepped as appropriate (including re-glazing where needed) and finish coated
The storm windows were re-hung upon completion of the painting
One coat of Rustoleum, oil-based, rust oxide primer to all rusted nail head areas
One complete coat of C2 oil primer tinted to match the finish coat colors applied to all included areas
One complete coat of Sherwin Williams, latex, Exterior Duration, satin to all siding
One complete coat of Sherwin Williams, latex, Exterior Duration, gloss to all trim
Two complete coats of Sherwin Williams, latex, Exterior Duration, gloss to all included door and shutters areas
Two complete coats of Sikkens Rubol DEK, solid oil stain to all porch floor areas

Lopco Contracting

Click on the link below
for a FREE estimate or
call 866.86.LOPCO.

Lopco Contracting
Lopco Contracting
Lopco Contracting
Lopco Contracting Lopco Contracting
Lopco Contracting
Registration #s:
RI 21331 • MA 145887 • CT 610184

LOPCO Contracting is a member of:
Better Business Bureau/Greater Providence Chamber of Commerce
Lopco Contracting
Lopco Contracting

© 2008 LOPCO Contracting. All rights reserved.
19 Joslin Street, Providence, RI 02909
ph: 401.270.2664 • toll free: 866.86.LOPCO (56726) • info@lopcocontracting.com

Lopco Contracting